Each year, many fires occur on construction jobsites as a result of
temporary heat, misuse of flammable liquids, etc. Establishing a fire
protection plan for your job site will help eliminate the related
hazards and the large losses related to fires. This toolbox talk will
provide a brief summary of the OSHA regulations for fire protection and
provide some fire protection safety tips.
Fire Extinguishers:
• Fire extinguishers must be readily
available on every job site. OSHA specifically requires at least one
fire extinguisher for every 3,000 square feet of building space.
• The travel distance to a fire extinguisher shall not exceed 100 feet.
• The fire extinguishers must be serviced annually to ensure they will work when needed.
•
A fire extinguisher must be immediately available during any hot work
such as welding, cutting, sweating pipes, etc. If hot work regularly
occurs on a jobsite, a hot work permit system should be developed.
Material Storage:
• Debris or combustible material may not be stored within 10 feet of a building.
• Storage piles of combustible material should be stable and should not exceed 20 feet in height.
• The entire storage location on a job site must be kept free from unnecessary debris or weed/ grass growth.
• Inside storage of materials must allow for at least 36 inches of clearance from sprinkler heads.
• Smoking controls must be maintained near areas which constitute a fire hazard.
•
Straw used to insulate concrete should be cleaned up as soon as
possible in order to reduce the amount of combustible material in and
around a job site.
Flammable Liquids:
• No more than 25 gallons of flammable or
combustible liquids may be stored inside of a building unless it is
stored in approved flammable liquids cabinet.
• Gasoline must be stored in approved “safety cans”.
• An approved fire extinguisher must be located in close proximity to the storage location of any flammable liquids.
Temporary Heat:
• Always maintain at least 6-feet of clearance
from the temporary heaters. If temporary heaters are used in tarped
areas, 10 foot clearances must be maintained.
• Always install a shut off valve at the point of fuel connection for temporary heaters.
• Establish a plan to check on the placement of heaters throughout the day.
• Never store propane inside of a building.
• The gas line hoses feeding the temporary heaters must be protected from damage.
•
Some heaters require the use of non-combustible material (drywall
sheet) under the heater when it is placed on a wood deck. Check with the
requirements for your heater.
• Maintaining access to a fire extinguisher near temporary heat is recommended.
• Read the safety material provided from the propane supplier regarding specific safety procedures for storage tanks.
Safety 360, by Assurance [MORE]
View all On the Job Safety Talks that are available online.
###
Thursday, April 18, 2013
Thursday, April 4, 2013
On the job tool box safety talks - Hydrogen Sulfide Poisoning
Hydrogen sulfide is a colorless, very
poisonous, flammable gas with the characteristic foul odor of rotten eggs. It
often results from the bacterial breakdown of organic matter in the absence of
oxygen, such as in swamps and sewers (manholes).
Just a few breaths of air
containing high levels of hydrogen sulfide gas can cause death. Lower,
longer-term exposure can cause eye irritation, headache, and fatigue.
###
Friday, March 29, 2013
Tuesday, March 19, 2013
Construction Safety Council Plans to Relocate
HILLSIDE, IL., March 2013- The Construction Safety Council is making no small
plans. After 13 years at its present location
at 4100 Madison Street in Hillside, the Construction Safety Council announced
today it will soon be moving its operations to a newer, state of the art
facility. The exact location has not yet
been finalized, but the excitement has begun.
As the
construction industry struggles to get back on its feet after the economic and
building recession, the Council is preparing itself to be ready and even more
capable of serving the construction industry not only at a new location, but also
with new classrooms, trainers, resources and more course offerings. Council employees are taking a fresh look at
providing new ways to better service their customers.
During the slowdown
over the last several years, the Council has taken advantage of its downtime to
examine and reinvent its programs and update materials. While still offering its standard array of safety
classes and training materials, the Council is expanding its customized
training courses to address new areas of safety in construction as well as
general industry. For starters, the Council
recently customized a fall protection program for the Brookfield Zoo, and has
also worked in partnership with the Operating Engineers Local 150 to develop a
new Rigging and Signaling Course. The
Council also upgraded its existing crane safety training materials to address
the changes in the new crane standard that will go into effect in 2014.
Over the
past several months, the Construction Safety Council has also been building its
cadre of outreach trainers, focusing on instructor development as well as
maximizing best practices in adult learning techniques in its courses.
New
technology presently being developed will give employers easy online access to
track safety training for employees and potential employees. The Council has also totally revised its IT
processes to streamline operations and efficiency. In
addition to the popular online “Excavation Safety for a Competent Person” that
has trained over 5527 in the last 4 years, more online courses are in the
works.
By all
indications, the construction industry is on the verge of a comeback and the
Construction Safety Council will be ready and able to provide current, high
quality, state of the art safety training when the industry booms again! Look for further updates soon!
-----------------------------------------------------------------------------------------------------
Established in 1989, the
Construction Safety Council is an Illinois 501 (c) 3 non-profit charitable
organization specializing in the development and delivery of safety training to
the construction industry. It is also
part of the National Safety Education Center, one of only 28 OSHA authorized
training centers in the country. For
more information call toll free 800-552-7744.
Monday, March 18, 2013
General Industry Safety Breakfast-Curious to see how will OSHA affect you in 2013 and beyond?
Monday * March 25, 2013 * 9:00am-11:00am
Curious to see how will OSHA affect you in 2013 and beyond? Join
John Newquist, former Assistant Regional Administrator, for an update on
where OSHA is focusing its efforts in the next twelve months. Learn
about the recent changes in OSHA and the most frequently found
violations for manufacturing. The session will empower you to see
opportunities for hazard exposure and communicate these issues to your
employer and co-workers before there is an incident.Meeting Location:
Construction Safety Council
4100 Madison Street Hillside, IL 60162
Office: 708 - 544-2082 Fax: 708 - 544-2371
www.buildsafe.org
The fee is $30 per person - Due to limited seating registration is required - Please fill out and fax in the registration form to 708-544-2371 .
Download the Fax Registration Form
###
Thursday, February 28, 2013
Seven Common Causes of Incidents.
Consider this statistic: 80 out of every 100 incidents are the fault of
the person involved in the incident.Unsafe Acts cause four times as many
incidents & injuries as unsafe conditions
.
Incidents occur for many reasons. In most industries people tend to look
for "things" to blame when an incident happens, because it's easier
than looking for "root causes," such as those listed below. Consider the
underlying incident causes described. Have you been guilty of any of
these attitudes or behaviors? If so, you may have not been injured but
next time you may not be so lucky.
Taking Shortcuts
Every day we make decisions we hope will make the job faster and more
efficient.But do time savers ever risk your own safety, or that of other
crew members? Short cuts that reduce your safety on the job are not
shortcuts, but an increased chance for injury.
•
Being Over Confident:
Confidence is a good thing. Overconfidence is too much of a good thing.
"It'll never happen to me" is an attitude that can lead to improper
procedures, tools, or methods in your work. Any of these can lead to an
injury.
•
Starting a Task with Incomplete Instructions:
To do the job safely and right the first time you need complete
information. Have you ever seen a worker sent to do a job, having been
given only a part of the job's instructions? Don't be shy about asking
for explanations about work procedures and safety precautions. It isn't
dumb to ask questions; it's dumb not to.
*
Poor Housekeeping:
When clients, managers or safety professionals walk through your work
site, housekeeping is an accurate indicator of everyone's attitude about
quality, production and safety. Poor housekeeping creates hazards of
all types. A well maintained area sets a standard for others to follow.
Good housekeeping involves both pride and safety.
•
Ignoring Safety Procedures:
Purposely failing to observe safety procedures can endanger you and your
co-workers. You are being paid to follow the company safety policies -
not to make your own rules. Being "casual" about safety can lead to a
casualty!
•
Mental Distractions from Work:
Having a bad day at home and worrying about it at work is a hazardous
combination. Dropping your 'mental' guard can pull your focus away from
safe work procedures. You can also be distracted when you're busy
working and a friend comes by to talk while you are trying to work.
Don't become a statistic because you took your eyes off the machine
"just for a minute."
*
Failure to Pre-Plan the Work:
There is a lot of talk today about Job Hazard Analysis. JHA's are an
effective way to figure out the smartest ways to work safely and
effectively. Being hasty in starting a task, or not thinking through the
process can put you in harm’s way. Instead, Plan Your Work and then Work Your Plan!
Provided by Assurance.
View all On the Job Toll Box Safety Talks
###
Thursday, February 21, 2013
Winter Weather Safety
During winter weather conditions, extra caution is needed. Most people
are aware of this situation, but there is always a higher level of
automobile accidents during the first few snows of the year. This is
because people are notorious for forgetting basic lessons on safety.
Keeping this fact in mind, consider the following reminders that will
reduce the potential for injuries:
Footwear
Traction is key. Work boots need to provide ankle support and traction. Rubber goulashes are often a good bet to wear over your work boots to maintain the necessary traction and keep your feet dry.
Slips and Falls
Keep work areas clear. Access paths to buildings should be maintained at least three feet wide and should not have accumulations of ice or other slippery conditions. Clean up every day to avoid hidden trip hazards underneath snow. Remember that stairs must remain clean and clear of snow and ice if they are to be used.
Ladders
• Securing the bottom of ladders is key to avoiding kick-out due to slippery conditions.
• No leaning of step ladders on flat slippery surfaces.
• Secure top of ladder and make sure all access ladders extend 3 feet about the landing.
Stay Warm
• Avoid caffeinated or alcoholic beverages.
• Wear a hat and scarf. Up to 50% of heat loss occurs from the head and neck.
• Wear three layers of clothing.
• Avoid extended periods of exposure to windy conditions that could put you at risk for frostbite or hypothermia.
Driving
• Apply safe driving principles to your workday.
• Snowy weather requires additional awareness and caution Look ahead further, and anticipate possible accidents.
• When driving, move deliberately and steadily.
• Stopping distances should be quadrupled when snow is on the ground.
Other
Wearing additional bulky clothing greatly reduces how agile you can be. This is an important fact to keep in mind when you are climbing ladders, through trusses, etc.
[MORE]
By: Assurance - Safety 360
Footwear
Traction is key. Work boots need to provide ankle support and traction. Rubber goulashes are often a good bet to wear over your work boots to maintain the necessary traction and keep your feet dry.
Slips and Falls
Keep work areas clear. Access paths to buildings should be maintained at least three feet wide and should not have accumulations of ice or other slippery conditions. Clean up every day to avoid hidden trip hazards underneath snow. Remember that stairs must remain clean and clear of snow and ice if they are to be used.
Ladders
• Securing the bottom of ladders is key to avoiding kick-out due to slippery conditions.
• No leaning of step ladders on flat slippery surfaces.
• Secure top of ladder and make sure all access ladders extend 3 feet about the landing.
Stay Warm
• Avoid caffeinated or alcoholic beverages.
• Wear a hat and scarf. Up to 50% of heat loss occurs from the head and neck.
• Wear three layers of clothing.
• Avoid extended periods of exposure to windy conditions that could put you at risk for frostbite or hypothermia.
Driving
• Apply safe driving principles to your workday.
• Snowy weather requires additional awareness and caution Look ahead further, and anticipate possible accidents.
• When driving, move deliberately and steadily.
• Stopping distances should be quadrupled when snow is on the ground.
Other
Wearing additional bulky clothing greatly reduces how agile you can be. This is an important fact to keep in mind when you are climbing ladders, through trusses, etc.
[MORE]
By: Assurance - Safety 360
Subscribe to:
Posts (Atom)