Workplace safety in the United States is evolving due to better
awareness and implementation of NFPA 70E: Standard for Electrical Safety
in the Workplace®.
Yet hundreds of deaths and thousands of
disabling injuries still occur each year due to shock, electrocution,
arc flash, and arc blast -- and most could be prevented through NFPA 70E
compliance.
Paul Satti will cover the following topics:
Personal Protective Equipment
Lockout/Tagout
Flash Protection
Electrical Hazards and Accident Prevention
Meeting Location:
Safety Council
4100 Madison Street Hillside, IL 60162
Registration fee: $30
Download the registration form.
###
Monday, September 30, 2013
Thursday, September 26, 2013
General Industry Safety Breakfast
Workplace safety in the United States is evolving due to better awareness and implementation of NFPA 70E: Standard for Electrical Safety in the Workplace®.
Yet hundreds of deaths and thousands of disabling injuries still occur each year due to shock, electrocution, arc flash, and arc blast -- and most could be prevented through NFPA 70E compliance.
Download the registration form
Paul Satti will cover the following topics:
Personal Protective Equipment
Lockout/Tagout
Flash Protection
Electrical Hazards and Accident Prevention
The fee is $30 per person - Due to limited seating registration is required - Please fill out and fax in the registration form to 708-544-2371 .
Friday • October 25, 2013 • 9:00am—11:00am
Meeting Location:
Safety Council
4100 Madison Street Hillside, IL 60162
Office: 708 - 544-2082 Fax: 708 - 544-2371 www.buildsafe.org
For more information about this workshop or any other general industry safety classes CSC has to offer please contact:
Callie Caballero 708-544-2082 x214 ccaballero@buildsafe.org
Or visit our website at www.buildsafe.org
Yet hundreds of deaths and thousands of disabling injuries still occur each year due to shock, electrocution, arc flash, and arc blast -- and most could be prevented through NFPA 70E compliance.
Download the registration form
Paul Satti will cover the following topics:
Personal Protective Equipment
Lockout/Tagout
Flash Protection
Electrical Hazards and Accident Prevention
The fee is $30 per person - Due to limited seating registration is required - Please fill out and fax in the registration form to 708-544-2371 .
Friday • October 25, 2013 • 9:00am—11:00am
Meeting Location:
Safety Council
4100 Madison Street Hillside, IL 60162
Office: 708 - 544-2082 Fax: 708 - 544-2371 www.buildsafe.org
For more information about this workshop or any other general industry safety classes CSC has to offer please contact:
Callie Caballero 708-544-2082 x214 ccaballero@buildsafe.org
Or visit our website at www.buildsafe.org
Thursday, September 19, 2013
2014 Construction Expo and Safety Conference-call for abstracts
Mark your calendars now!
Construction Expo and Safety Conference
March 3 & 4, 2014
Drury Lane, Oakbrook Terrace
|
Watch for more information and
registration soon!
Call for
Abstracts!
If you are interested in submitting
a session abstract, please download the information and submission
form. All submissions should be received no later than October 31, 2013.
|
Friday, September 13, 2013
OSHA announces that the notice of proposed rulemaking for respirable silica.
Rulemaking for respirable silica has been published in the Federal Register.
WASHINGTON –
The Occupational Safety and Health Administration today announced that the
notice of proposed rulemaking for respirable crystalline silica has published
in the Federal Register.
OSHA invites and strongly
encourages the public to participate in the process of developing a final rule
through written comments and participation in public hearings.
The public will have until
Dec. 11, 2013, to submit written comments on the proposed rule.
Hearings on the proposed
silica rule are scheduled to begin on March 4, 2014 at the Department of
Labor’s Frances Perkins Building in Washington, DC. Members of the public who
wish to participate in public hearings must submit a notice of intention to
appear by Nov. 12, 2013.
Additional information on the
proposed rule, including five fact sheets, and procedures for submitting
written comments and participating in public hearings is available at http://www.osha.gov/silica/index.html.
See the Federal Register notice
to read the notice of proposed rulemaking.
Under the Occupational Safety
and Health Act of 1970, employers are responsible for providing safe and
healthful workplaces for their employees. OSHA’s role is to ensure these
conditions for America’s working men and women by setting and enforcing
standards, and providing training, education and assistance. For more
information, visit www.osha.gov.
# # #
Monday, September 9, 2013
On the Job Toolbox Talks - Trenching and Excavation
Trench Depths
• Less than 5 feet (1.5 meters) - A competent person should review the excavation soil and plans and determine if a protective system as described below is required.
• 5 feet (1.5 meters) to less than 20 feet (6.1 meters) - a protective system must be in place unless a competent person has determined that the excavation is entirely in solid, stable rock with no potential for cave-in.
• 20 feet or greater – a protective system designed and approved by a registered professional engineer must be installed.
Competent Person
A person trained in trenching and excavation safety should inspect the excavation daily. The inspection should berepeated if conditions change (e.g. after rain fall, freeze/thaw weather changes). The competent person should be
authorized to order immediate corrective action, including restricting entry into the excavation, until any hazards orpotential hazards have been eliminated.
Protective Systems to prevent cave-ins
• Benching – excavating the sides of an excavation to form one or more horizontal levels or steps (1)
• Sloping – Cutting back the trench wall at an angle away from the excavation. (2)
• Shoring – Installing a support system of using materials such as posts, beams, planking and hydraulic jacks tosupport or “shore up” the sides of the excavation. (3)
• Shielding - Using trench boxes or similar enclosures to prevent cave-ins. (4)
• Refer to ANSI A12.10-1998 for specific design requirements.
Other safety requirements
• Keep heavy equipment away from the sides of the excavation
• Keep spoils piles at least 2 feet (1 meter) away from the trench edge. (5)
• For excavations deeper than 4 feet – conduct air monitoring similar to confined space entry – oxygen,combustibles, and toxic gases/vapors.
• Ladders, steps, or ramps must be provided for safe exiting from the trench. An exit point must always be within
25 feet of all workers at all times. These may need to be continuously relocated as the job progresses. (6)
• Ensure workers are trained on work hazards and proper work practices.
• Develop a trench emergency action plan and train workers and supervisors on the proper actions to take in an
emergency.
View Steps 1-6
[MORE]
Thursday, September 5, 2013
Why Accidents Occur
Every accident is caused by a breakdown in one of four areas: the worker, the tools used, the materials used, or the methods used. Often there is a breakdown in at least two areas; one being the worker and the other coming from one of the three other areas. The accident’s cause usually results from an unsafe act or an unsafe condition. Here is a review of some types of unsafe acts, the results from, and unsafe conditions.
Guide for Discussion On the Job.
Types of Unsafe Acts:
Operating a tool or some equipment without authority.
Working at an unsafe speed.
Using unsafe or defective equipment or using equipment in an unsafe manner.
Disconnecting safety devices.
Unsafe unloading, placing or mixing materials.
Assuming an unsafe position or posture.
Working on moving equipment.
Horseplay or distractions; taking shortcuts.
Failure to wear and use personal protective equipment.
Unsafe Acts Result From:
An improper attitude.
Lack of knowledge or skills.
Reduced mental or physical capacities.
Unsafe Conditions:
Improper guarding.
Defective equipment or materials.
Unsafe working procedures.
Improper housekeeping.
Poor lighting or ventilation.
Improper personal attire (Poor dress).
No or improper evaluation of site conditions.
Information provided by: Washington State Dept. of Labor & Industries
###
Guide for Discussion On the Job.
Types of Unsafe Acts:
Operating a tool or some equipment without authority.
Working at an unsafe speed.
Using unsafe or defective equipment or using equipment in an unsafe manner.
Disconnecting safety devices.
Unsafe unloading, placing or mixing materials.
Assuming an unsafe position or posture.
Working on moving equipment.
Horseplay or distractions; taking shortcuts.
Failure to wear and use personal protective equipment.
Unsafe Acts Result From:
An improper attitude.
Lack of knowledge or skills.
Reduced mental or physical capacities.
Unsafe Conditions:
Improper guarding.
Defective equipment or materials.
Unsafe working procedures.
Improper housekeeping.
Poor lighting or ventilation.
Improper personal attire (Poor dress).
No or improper evaluation of site conditions.
Information provided by: Washington State Dept. of Labor & Industries
###
Friday, August 30, 2013
US Department of Labor’s OSHA announces proposed rule to protect workers exposed to crystalline silica.
WASHINGTON – The U.S. Department of Labor’s Occupational
Safety and Health Administration today announced a proposed rule aimed at
curbing lung cancer, silicosis, chronic obstructive pulmonary disease and
kidney disease in America’s workers. The proposal seeks to lower worker
exposure to crystalline silica, which kills hundreds of workers and sickens
thousands more each year. After publication of the proposal, the public will
have 90 days to submit written comments, followed by public hearings.
“Exposure to silica can be deadly, and limiting that
exposure is essential,” said Dr. David Michaels, assistant secretary of labor
for occupational safety and health. “Every year, exposed workers not only lose
their ability to work, but also to breathe. This proposal is expected to
prevent thousands of deaths from silicosis—an incurable and progressive disease—as
well as lung cancer, other respiratory diseases and kidney disease. We’re
looking forward to public comment on the proposal.”
Once the full effects of the rule are realized, OSHA
estimates that the proposed rule would result in saving nearly 700 lives per
year and prevent 1,600 new cases of silicosis annually.
Exposure to airborne silica dust occurs in operations
involving cutting, sawing, drilling and crushing of concrete, brick, block and
other stone products and in operations using sand products, such as in glass
manufacturing, foundries and sand blasting.
The proposal is based on extensive review of scientific and
technical evidence, consideration of current industry consensus standards and outreach
by OSHA to stakeholders, including public stakeholder meetings, conferences and
meetings with employer and employee organizations.
“The proposed rule uses common sense measures that will
protect workers’ lives and lungs—like keeping the material wet so dust doesn’t
become airborne,” added Michaels. “It is designed to give employers flexibility
in selecting ways to meet the standard.”
The proposed rulemaking includes two separate standards—one
for general industry and maritime employment, and one for construction.
The agency currently enforces 40-year-old permissible
exposure limits (PELs) for crystalline silica in general industry, construction
and shipyards that are outdated, inconsistent between industries and do not
adequately protect worker health. The proposed rule brings protections into the
21st century.
The proposed rule includes a new exposure limit for
respirable crystalline silica and details widely used methods for controlling
worker exposure, conducting medical surveillance, training workers about
silica-related hazards and recordkeeping measures.
OSHA rulemaking relies heavily on input from the public and the
agency will conduct extensive engagement to garner feedback from the public
through both written and oral comments. OSHA will accept public comments on the
proposed rule for 90 days following publication in the Federal Register,
followed by public hearings. Once public hearings conclude, members of the
public who filed a notice of intention to appear can then submit additional
post-hearing comments. Additional information on the proposed rule, including a
video; procedures for submitting comments and the public hearings can be found
at www.osha.gov/silica.
Under the Occupational Safety and Health Act of 1970,
employers are responsible for providing safe and healthful workplaces for their
employees. OSHA's role is to assure these conditions for America's working men
and women by setting and enforcing standards, and providing training, education
and assistance. For more information, visit http://www.osha.gov.
# # #
# # #
Subscribe to:
Posts (Atom)