Adverse affects of whole body vibration range from simple fatigue to motion sickness, low back pain, degeneration of the lumbar spinal system and herniated disks.
[LEARN MORE]
###
Monday, March 16, 2015
Sunday, March 8, 2015
Carbon Monoxide CO - On the job Tool Box Talks
View the full article
Carbon monoxide is an odorless, colorless and toxic gas. Because it is impossible to see, taste or smell the toxic fumes, CO can kill you before you are aware of your exposure. At lower levels of exposure, CO causes mild effects that are often mistaken for the flu. These symptoms include headaches, dizziness, disorientation, nausea and fatigue. The effects of CO exposure can vary greatly from person to person depending on age, overall health and the concentration and length of exposure.
CO is found in combustion exhaust, such as those produced by cars, trucks and small gasoline engines (generators).
###
Carbon monoxide is an odorless, colorless and toxic gas. Because it is impossible to see, taste or smell the toxic fumes, CO can kill you before you are aware of your exposure. At lower levels of exposure, CO causes mild effects that are often mistaken for the flu. These symptoms include headaches, dizziness, disorientation, nausea and fatigue. The effects of CO exposure can vary greatly from person to person depending on age, overall health and the concentration and length of exposure.
CO is found in combustion exhaust, such as those produced by cars, trucks and small gasoline engines (generators).
###
Wednesday, March 4, 2015
Slips, Trips and Falls - On the job Tool Box Safety Talks
View the full article
Slips, trips and falls is the number 1 reason for an industrial injury in the United States. Thousands of disabling injuries—and even deaths—occur each year as a result of slips, trips, and falls:
Slips, trips and falls is the number 1 reason for an industrial injury in the United States. Thousands of disabling injuries—and even deaths—occur each year as a result of slips, trips, and falls:
•
From heights, on stairs, and on level ground
·
At work and at home
Pay Attention
to Your Movements and Surroundings
- Focus on where you're going, what you're doing, and what lies ahead.
- Expect the unexpected.
- Take responsibility for fixing, removing, or avoiding hazards in your path.
- Wear sturdy shoes with non-skid soles and flat heels.
- Avoid baggy or loose pants you could trip over.
- Walk, don't run.
- Wipe your feet when you come in from rain or snow.
- Report or replace any burned out lights or inadequate lighting.
- Watch out for floors that are uneven, have holes, etc.
- Keep your hands at your sides, not in your pockets, for balance.
- Don't carry loads you can't see over.
- Walk slowly on slippery surfaces. —Slide your feet and avoid sharp turns.
- Sit in chairs with all four chair legs on the floor.
- Make sure all wheels or casters are on the floor.
- Be constantly alert for—and remove or go around—obstructions in your path.
- This information is provided by: Assurance Agency
Sunday, February 22, 2015
CSC Classes for March 2015
Construction
Safety Conference and Expo
March 2, 2015 and March 3, 2015
Register for the Conference
CHST Prep Course
March 4, 2015 and March 5, 2015
This is a 2 day course
Scaffold User and Erector Hazards
7:30 am to 4:00 pm
Saturday, March 7, 2015
Wednesday, March 18, 2015
This class is being held twice this month.
OSHA 500 Instructor Course
Monday, March 9,2015 to Friday, March 13, 2015
7:30 am to 4:00 pm
To register contact the National Safety Education Center at 800-656-5317 or online at http://www.nsec.niu.edu/nsec/
OSHA 30 Hour for Construction
4 Day Class
Tuesday, March 10, 2015
Thursday, March 12, 2015
Tuesday, March 17, 2015
Thursday, March 19, 2015
7:30 am - 4:00 pm
Incident Investigations
Saturday, March 14, 2015
7:30 am to 11:30 am
Record keeping Guidelines
Saturday, March 14, 2015
12 Noon to 4:00 pm
Hazard Communication:
March 2, 2015 and March 3, 2015
Register for the Conference
CHST Prep Course
March 4, 2015 and March 5, 2015
This is a 2 day course
Scaffold User and Erector Hazards
7:30 am to 4:00 pm
Saturday, March 7, 2015
Wednesday, March 18, 2015
This class is being held twice this month.
OSHA 500 Instructor Course
Monday, March 9,2015 to Friday, March 13, 2015
7:30 am to 4:00 pm
To register contact the National Safety Education Center at 800-656-5317 or online at http://www.nsec.niu.edu/nsec/
OSHA 30 Hour for Construction
4 Day Class
Tuesday, March 10, 2015
Thursday, March 12, 2015
Tuesday, March 17, 2015
Thursday, March 19, 2015
7:30 am - 4:00 pm
Incident Investigations
Saturday, March 14, 2015
7:30 am to 11:30 am
Record keeping Guidelines
Saturday, March 14, 2015
12 Noon to 4:00 pm
Hazard Communication:
Globally Harmonized System of Classification & Labeling of
Chemicals
Monday, March 16, 2015
7:30 am to 11:30 am
AHA First Aid/CPR/AED
Friday, March 20, 2015
7:30 am to 1:00 pm
ATSSA Flagger/Work Zone Hazards Training
Monday, March 23, 2015
7:30 am to 1:00 pm
OSHA 10 Hour for Construction
2 day class
Friday, March 20, 2015
7:30 am to 1:00 pm
ATSSA Flagger/Work Zone Hazards Training
Monday, March 23, 2015
7:30 am to 1:00 pm
OSHA 10 Hour for Construction
2 day class
Tuesday, March 24, 2015 - 7:30 am to 4:00 pm
Wednesday, March 25, 2015 - 7:30 am to 1:00 pm
Fall Protection Safety for the
Competent Person
Tuesday, March 24, 2015
7:30 am to 4:00 pm
Excavation Safety for the Competent Person
Wednesday, March 25, 2015
7:30 am to 4:00 pm
Signal Person Hazards for Cranes
Thursday, March 26, 2015
7:30 am to 11:30 am
Rigging Hazard Awareness
Thursday, March 26, 2015
12 Noon to 4:00 pm
Confined Space Entry
Thursday, March 26, 2015
7:30 am to 4:00 pm
NFPA 70 E Electrical Arc Flash Training and Electrical Safety for Construction. Friday, March 27, 2015
Tuesday, March 24, 2015
7:30 am to 4:00 pm
Excavation Safety for the Competent Person
Wednesday, March 25, 2015
7:30 am to 4:00 pm
Signal Person Hazards for Cranes
Thursday, March 26, 2015
7:30 am to 11:30 am
Rigging Hazard Awareness
Thursday, March 26, 2015
12 Noon to 4:00 pm
Confined Space Entry
Thursday, March 26, 2015
7:30 am to 4:00 pm
NFPA 70 E Electrical Arc Flash Training and Electrical Safety for Construction. Friday, March 27, 2015
7:30 am to 11:30 am
Sunday, February 15, 2015
CONSTRUCTION EXPO & SAFETY CONFERENCE 2015
Registration
Now Open!
Construction
Safety Council and ASA Chicago proudly present the Construction Expo &
Safety Conference 2015
The
Construction Safety Council and ASA Chicago, an association representing
subcontractors of all construction trades, announces its annual Construction
Expo & Safety Conference 2015. This year, the Safety Conference will be
held on Monday, March 2, 2015 from 7:00AM to 12:00PM (noon), and Tuesday March
3, 2015 from 7:00am to 4:30pm at the Drury Lane Conference Center in Oakbrook
Terrace. The Construction Expo will take place on Tuesday, March 3, 2015 from
9:00AM to 4:00PM and will feature ASA Chicago's Business Practice Interchange
(BPI) from 8:00AM to 9:00AM.
30
Educational Sessions are available through the Construction Safety Council. The
Construction Safety Conference Sessions will include such topics as; What to
Expect from OSHA in 2015; Edwin S. Rearick Safety Forum; Small Fires, Big
Losses; Workers' Compensation 101; Hearing Conservation in Construction; OSHA
Training Programs; Training Your Employees in a Language they Understand, to
name a few. Many more courses will be available.
New
this year, Sponsorships for the Safety Sessions are being offered. Please visit
our home page at www.buildsafe.org for more
information or follow this link for the form: http://buildsafe.org/documents/SponsorshipForm.pdf.
Also,
ASA Chicago presents one of the largest Construction Expos in Chicagoland!
Featuring over 100 exhibitors including subcontractors, suppliers, and general
contractor firms who are part of the association's General Contractors Council.
Judging from Expo's past, we expect over 1,200 people to walk through the 2015
event. This mixture of general contractors, trade subcontractors, and
construction service and material providers present a unique opportunity for
both the exhibitors and attendees to network with their peers and to make new
contacts. In addition, the ASA Chicago Construction Expo and Construction
Safety Conference 2015 offers exciting networking opportunities, deluxe food
buffet, equipment displays and door prizes. For more information about exhibiting
or Expo sponsorships, please visit www.asachicago.org.
Registration
for the Safety Sessions and session sponsorships is now open. Click here for a
pdf of the safety session brochure: http://buildsafe.org/documents/2015_CSC_EXPO_PACKET.pdf.
Visit
www.buildsafe.org today to
register or send in your registration form today!
Print the Sponsorship Form
View Information about: Exhibiting, Sponsorship and General Expo Admission.
Saturday, February 7, 2015
Incident Prevention-On the Job Tool Box Safety Talks
View the full article
Generally speaking, we are not born with common sense, we acquire it throughout life. Actually, common sense is really common experience--we learn about life from others' experiences as well as our own. Awareness of your environment, self-preservation and concern for your fellow workers are all factors in good common sense. Contrary to popular opinion, all workers can prevent themselves from getting hurt. The easy way to avoid pain is to observe how others have taken risks and been injured, rather than learning the hard way--from your own injury. That's common sense!
The experts say at least 80% of industrial accidents are caused by unsafe acts on the part of employees--and not by unsafe conditions. Although employers are required by law to provide a safe and healthful workplace, it is up to you to be aware of your work environment and follow safe work practices. By avoiding unsafe acts and practicing common sense, your work will go smoother, with less chance for accidents. Statistically, most accidents are caused by unsafe acts, including:
Being In A Hurry - Sometimes there is more concern for completing a job quickly instead of safely. Take time to do a good job and a safe job.
Taking Chances - Daring behavior or blatant disregard for safe work practices can put the whole work team at risk. Follow all company safety rules and watch out for your fellow employees. Horseplay is never appropriate on the job and can lead to disciplinary action.
Being Preoccupied - Daydreaming, drifting off at work, thinking about the weekend and not paying attention to your work can get you seriously hurt or even killed. Focus on the work you are paid to do. If your mind is troubled or distracted, you're at risk for an accident.
Having A Negative Attitude - Being angry or in a bad mood can lead to severe accidents because anger nearly always rules over caution. Flying off the handle at work is potentially dangerous. Keep your bad moods in check, or more than one person may be hurt. Remember to stay cool and in charge of your emotions.
Failing To Look For Hidden Hazards - At many jobsites, work conditions are constantly changing. Sometimes new, unexpected hazards develop. Always be alert for changes in the environment. Hidden hazards include spilled liquids that could cause slips and falls; out-of-place objects that can be tripped over; unmarked floor openings one could step into; low overhead pipes that could mean a head injury; and other workers who don't see you enter their hazardous work area.
Remember to stay alert for hazards, so you won't become one more accident statistic: You can do a quality job without rushing. Maintain a positive attitude and keep your mind on your work. This is just common sense--something smart workers use!
This information is provided by: Assurance Agency
Generally speaking, we are not born with common sense, we acquire it throughout life. Actually, common sense is really common experience--we learn about life from others' experiences as well as our own. Awareness of your environment, self-preservation and concern for your fellow workers are all factors in good common sense. Contrary to popular opinion, all workers can prevent themselves from getting hurt. The easy way to avoid pain is to observe how others have taken risks and been injured, rather than learning the hard way--from your own injury. That's common sense!
The experts say at least 80% of industrial accidents are caused by unsafe acts on the part of employees--and not by unsafe conditions. Although employers are required by law to provide a safe and healthful workplace, it is up to you to be aware of your work environment and follow safe work practices. By avoiding unsafe acts and practicing common sense, your work will go smoother, with less chance for accidents. Statistically, most accidents are caused by unsafe acts, including:
Being In A Hurry - Sometimes there is more concern for completing a job quickly instead of safely. Take time to do a good job and a safe job.
Taking Chances - Daring behavior or blatant disregard for safe work practices can put the whole work team at risk. Follow all company safety rules and watch out for your fellow employees. Horseplay is never appropriate on the job and can lead to disciplinary action.
Being Preoccupied - Daydreaming, drifting off at work, thinking about the weekend and not paying attention to your work can get you seriously hurt or even killed. Focus on the work you are paid to do. If your mind is troubled or distracted, you're at risk for an accident.
Having A Negative Attitude - Being angry or in a bad mood can lead to severe accidents because anger nearly always rules over caution. Flying off the handle at work is potentially dangerous. Keep your bad moods in check, or more than one person may be hurt. Remember to stay cool and in charge of your emotions.
Failing To Look For Hidden Hazards - At many jobsites, work conditions are constantly changing. Sometimes new, unexpected hazards develop. Always be alert for changes in the environment. Hidden hazards include spilled liquids that could cause slips and falls; out-of-place objects that can be tripped over; unmarked floor openings one could step into; low overhead pipes that could mean a head injury; and other workers who don't see you enter their hazardous work area.
Remember to stay alert for hazards, so you won't become one more accident statistic: You can do a quality job without rushing. Maintain a positive attitude and keep your mind on your work. This is just common sense--something smart workers use!
This information is provided by: Assurance Agency
Monday, February 2, 2015
Routes of Entry - On the Job Tool Box Talks
Routes of Entry - Working with chemicals always involves the risk of exposure. The health risk is dependent upon the toxicity of the chemical, the types of effects and the various routes of entry.
Routes of Entry
Inhalation is the primary route of entry for hazardous chemicals in the work environment. Nearly all materials that are airborne can be inhaled
Absorption through the skin is another route of entry. The skin is the largest organ of your body and a common exposure site for liquid and airborne
chemicals. Absorption through the skin can occur quite rapidly if the skin is cut or abraded. Intact skin is an effective barrier to many hazardous materials.
Ingestion-toxic materials can be swallowed and enter the body through the gastrointestinal tract. In the workplace, people can unknowingly ingest harmful chemicals when you eat, drink, or smoke in a contaminated work areas.
Injection occurs when a sharp object punctures the skin, allowing a chemical or infectious agent to enter your body. For example, injection can occur when a contaminated object such as a rusty nail punctures the skin
View the full article.
###
Routes of Entry
Inhalation is the primary route of entry for hazardous chemicals in the work environment. Nearly all materials that are airborne can be inhaled
Absorption through the skin is another route of entry. The skin is the largest organ of your body and a common exposure site for liquid and airborne
chemicals. Absorption through the skin can occur quite rapidly if the skin is cut or abraded. Intact skin is an effective barrier to many hazardous materials.
Ingestion-toxic materials can be swallowed and enter the body through the gastrointestinal tract. In the workplace, people can unknowingly ingest harmful chemicals when you eat, drink, or smoke in a contaminated work areas.
Injection occurs when a sharp object punctures the skin, allowing a chemical or infectious agent to enter your body. For example, injection can occur when a contaminated object such as a rusty nail punctures the skin
View the full article.
###
Subscribe to:
Posts (Atom)